AlcoMate Prestige with 3 decimal points accuracy is an advanced professional alcohol breathalyzer equipped with "Modular Sensor Technology".
AlcoMate Prestige comes with an innovative and patent pending technology that allows users to re-calibrate their breathalyzer without the need for shipping their device to USbreathalyzer.com for calibration as often as every 6 months to a year. The Prestige users themselves can now swap the sensor module with a factory pre calibrated module and save not only on cost but more importantly they eliminate the risk of being without their breathalyzer while it is out for calibration.
The sensor swapping is an ideal solution for all users specially for clinical users, field officers, or for devices on board a vessel in the open see. Now vessel operators and clinics can have their always ready and always accurate alcohol testing device.
What about "Pre-Calibrated field Replaceable Sensor Module"?
AlcoMate Prestige is the first breathalyzer that offers pre-calibrated
and field replaceable modules (patent-pending) in the market. One of
the main problems with using breathalyzers in critical applications is
that the alcohol sensor requires periodic re-calibration.
Unfortunately, the re-calibration process requires that the
breathalyzer be physically mailed or taken to a professional service
center. The process is costly for both consumer and service center, and
the delay of processing and shipping back-and-forth can be quite a
loss. The Pre-Calibrated Replaceable Alcohol Sensor Module can eliminate the delays and complications of re-calibration by
allowing a simply "snap out" an old module and "snap in" a new one.
This way, you can get back to reliable and accurate testing in a matter
of few minutes.
|
Government approvals
DOT / NHTSA / NF / CE and FDA approved
Replaceable Sensor Module
Eliminate the delays and complications of re-calibration
Wide Range
Wide range of testing, from 0.01% - 0.4%BAC
Fast Response Time
Short warm up and response time, as well as a fast recovery time between tests.
Disposable One-way Mouthpieces
Ensure sanitary testing of many subjects with the AlcoMate's disposable mouthpiece system.
Cumulative Test Counter
|
|
Highly Selective Oxide Sensor
The AlcoMate Prestige features the latest in the silicon-oxide semiconductor sensor technology
Deep-lung Air Sampling System
5 second blowing time allows for deeper lung samples, ensuring more accurate readings.
Ultra Bright Digital Display
Easy to operate and read even in low lighting conditions.
Sleek Design
Attractive design and shock resistant plastic.
Meets US Coast Guard Requirements
Recommended for maritime applications due to availability of the pre calibrated sensor module. |
How do I install a Pre-Calibrated Alcohol Sensor Module?
Take the following steps to install a new sensor module
|
|
|
Prepare your AlcoMate Prestige. |
Use a flat, sharp tool to carefully open the top cover. |
Lift the breath tube to access the sensor module. |
|
|
|
|
|
|
Remove the breath tube. It should remove easily |
Carefully raise the sensor module from the body. Do NOT detach the cable from the body. |
Remove the cable from the slot underneath the sensor module. |
|
|
|
|
|
|
Prepare a new
pre-
calibrated sensor module |
Insert the cable into the new sensor. Make sure the blue strip is toward the sensor, as shown. |
Replace the sensor module into its original position. |
|
|
Ready for Testing! |
|
|
Re-attach the breath tube directly on to the sensor. Make sure the front opening is aligned. |
Re-attach the cover on to the top of the body. It should snap in fairly easily. |
AlcoMate Prestige AL6000 Contents
Basic Kit |
|
Full Kit |
- AlcoMate Prestige AL6000
- Soft Carrying Pouch
- 2 AA Batteries
- 5 Mouthpieces
- Wrist Strap
- User's Guide
|
|
- AlcoMate Prestige AL6000
- Hard
Field Case
- Carrying Pouch
- 2 AA Batteries
- 5 Mouthpieces
- Wrist
Strap
- User's
Guide
|